Question: Can You Use Faster RAM Than Your Motherboard Supports?

Can RAM kill a motherboard?

Splendid.

iamacow : Anything is possible and I’ve seen a lot of strange things, but no, ram won’t kill a board, maybe a slot but not the board.

I would start at 101 basics because if you are having the same problem, it probably is more than just the motherboard or isn’t the board at all..

Which is faster ddr3/1600 or 1333?

The 1333 and 1600 designations refer to the transfer rates – theoretically, given same CAS latency, DDR3-1600 would perform better than DDR3-1333 due to its greater maximum bandwidth. … This DDR3 1333MHz RAM is running at 400MHz.

How do I know if my RAM is 1333 or 1600?

Clearly, you can see my ram is 1600 mhz from the name. BUT standard setting for all DDR3 sticks is 1333 which is JDEC standard. This is the default setting that most motherboards are set to as long as your Ram can atleast support 1333mhz. You’d need to overclock your bios to get 1600 mhz.

What happens if RAM is not compatible with motherboard?

Incompatible or misconfigured ram will cause the computer to “lock up” with no warning. Because on consumer PCs there is no ECC for Ram modules it is imperative to try to use compatible memory according to the system or motherboard manufacturer.

Does faster RAM matter?

Faster RAM will give your PC better performance in certain specific benchmarks, but in terms of actual benefit to most users, having more RAM available is almost always better than having faster RAM. … Graphics cards include their own memory, so games aren’t majorly affected by system RAM speed.

Can I use 4gb and 8gb RAM together?

IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time. Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. … Sometimes you will have to swap the RAM slots since the detection has bugs.

Can I use 3000mhz ram in 2133MHz motherboard?

Reputable. Yes you can the motherboard will just lower the speed so it can run. You can install ram running @ 3000mhz but it will just downclock it to 2133mhz.

How do I know what ram my motherboard supports?

Your computer’s motherboard will also determine RAM capacity, as it has a limited number of dual in-line memory module slots (DIMM slots) which is where you plug in the RAM. Consult your computer or motherboard manual to find this information. Additionally, the motherboard determines what kind of RAM you should pick.

What is the difference between ddr4 2400 and ddr4 2666?

The DDR4 2400 Ram has 2400 MHz memory speed that makes sure a quicker clock cycle to make your laptop work faster. This memory speed on top indicates 2.4 billion clock cycle speeds per second. Conversely, the DDR4 2666 Ram appears with 2666 MHz memory speed for smoother flame rates speed under heavy loads.

Can I use 2400mhz ram in 2133MHz motherboard?

Originally Answered: What happens if you put 2400mhz ram on a mother board that only uses 2133mhz? If you set it for 2133, it won’t be a problem. You can underclock RAM modules and they will work fine, since they were rated for faster operation to begin with.

Can I use 2666MHz ram in 2133MHz motherboard?

The 2133MHz is a standard for all DDR4 memory. Every memory card MUST be able to handle that, else it’s not a DDR4. What you may find is that the motherboard cannot increase the clockrate to that RAM’s 2666MHz. Thus you can’t use it up to its full potential.

Can a 2666mhz ram in 2400MHz motherboard?

If my motherboard supports ram up to 2400mhz, will the 2666mhz still work but bottle-necked at 2400mhz? As long as the speed is higher then you can run it. 2666mhz is just the maximum speed your ram will run at, but it can go any speed below just fine.

Is any RAM compatible with any motherboard?

Since each type of memory has different notch locations (which are important for installation), different memory technologies aren’t compatible with each other. Motherboards are generally only able to support one type of memory technology.

Can ddr4 2400 Replace 2666?

DDR4-2400 might likely work OK but I would stick with the DDR4-2666 its designed to use. And gaming or performance memory will do you no good. The motherboard will set the latency to be the same as the SKHynix or other OEM memory.

Does MHz matter buying RAM?

RAM frequency is measured in MHz and usually immediately follows the DDR version in the RAM spec. For example, 8GB DDR4-2400 RAM is running at a frequency of 2400MHz. … This is why though higher frequency RAM is technically faster, that additional speed often does not translate into better actual real world performance.

Can I use slower RAM in my motherboard?

You can use a slower RAM on faster motherboard. Technically the combination is going to work but performance will be highly compromised by RAM speed. So it’s advisable to use exact speed RAM module as specified on the motherboard as the maximum support speed.

Will 1600mhz ram work on 1333mhz motherboard?

1600mhz RAM will work at 1600mhz, or any speed less than that. RAM speed is set by your motherboard and processor combination. In short, yes 1600mhz ram will work at 1333mhz just fine.

Is 2133 MHz RAM good?

Crucial memory is always reliable and a good value. 2133MHz is the default speed for the new Skylake chipsets, and there is no point getting 2400 or anything higher unless you plan on overclocking.